Formula 1 Car (3D)

[Vishwaman Rai]

<P><strong>HI ALL!!&nbsp; This is my second post to cgtantra. Its my fav sport. f1 (drool!!) and i love modelling cars. Hope u like them. suggestions welcome. enjoy!</strong></P>
<P><IMG src="http://img317.imageshack.us/img317/7066/f1alpha0018ko.jpg" border="0"></P><edited><editID>Abhishek</editID><editDate>38755.8053819444</editDate></edited>

[ajaytantra]

<P>

good modelling man... but some probs with textures ...<IMG src="smileys/smiley5.gif" border="0"></P>
<P>&nbsp;&nbsp; well even i had modelled the same but&nbsp;without textures...im bad at texturing ( u can find mine somewhere in the previous pages in the same thread ( finished 3d works)...</P>
<P>&nbsp;&nbsp; i guess u can still do a lot more detailing...like the front rudders...and tail plates... and the depression ( in the projections that come out from both sides of the driver area)..is not like that..its more smoothly curved inside.. u seemed to have just cut that part of the polygons <IMG src="smileys/smiley4.gif" border="0">...</P>
<P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; nice attempt overall dude</P>

[Vishwaman Rai]

hi guys yea thanks ajay.. checked ur model. i think it in page 8 or 9. nice going. this should have been in the wip section actually cos i still have to make the mirrors and do texturing. well hope u guys like it. comments are welcome!! people!! heres a wire of the same shot<IMG src="http://img277.imageshack.us/img277/438/f1wire9dg.jpg" border="0">

[lostworldenator]

<P>Awesome Modelling skills DUDE ...................................</P>
<P>only CRc.....for ur RENDRING AND lighting ____ give more time on .......&gt;&gt;&gt; simply ur rokin................</P>
<P>GOOD JOB....................<IMG src="smileys/smiley32.gif" border="0"></P>

[andys_creation]

nice modelling dude....<br>
but apply some more cool textures so it'll look more realistic...<br>
anyways overall nice work...<img src="smileys/smiley32.gif" border="0"><img src="smileys/smiley32.gif" border="0"><br>
Best luck... <img src="smileys/smiley20.gif" border="0"><br>

[lostworldenator]

<P>Oh my god people here talking abttttt TExtures ________ is ur model havin textures here&gt;&gt;&gt;&gt;plzzzzzzzzzzz</P>
<P><SPAN =bold>Vishwaman confirm it dude.........really i didn't recognise there&gt;&gt;&gt;&gt;</SPAN></P>
<P><strong>nice work&gt;&gt;&gt;&gt;&gt; again</strong><BR></P>

[crusader]

hey vish modelling is cool.just texture it.da model luks awesum.keepon da gud work dude.

[Vishwaman Rai]

HI guys !! thanks a lot for your comments. i put a lot into modelling this and just a few more stuff to do to get it in the final stage. And a_mahiwal.. dude.. the car does have raytrace texture applied to it.. hence its reflecting and looking right.. just that by 'texturing' i meant the texturing of the Liveries of the car meaning the sponsor logos, numbers, company names etc. thats all! well guys see u later and thanks!!

[vfxmation]

Good modeling

[rushali_ks98]

<P>hey,</P>
<P>very nice work, post textured one<IMG src="smileys/smiley1.gif" border="0"></P>

[Vishwaman Rai]

<P>HI Everyone. here i am again with my textured version of my f1 car. hope u all like it. lemme know what u all think. thanks</P>
<P><IMG src="http://img355.imageshack.us/img355/2883/f1finalnearly11copy1ab.jpg" border="0"> </P><edited><editID>Abhishek</editID><editDate>38707.5779513889</editDate></edited>

[sONIC]

great. now that u have textured it , it looks so much better. only thing thats left is to put it on the race circuit.<br><br>the chrome on the rim needs improving. thats it.<br>

[bustedgame]

Hey very nice model and cool texture also but plz do something about
the tyres............ I think they need some hands on
them...........rest is too cool.........<br>
<br>
<br>

[BadboY]

<P>completly agreed with road train &amp; u should apply some racy kind of a texture to the helmet also it is loking very odd in your improved ferrari </P>
<P>any ways GOOD work keep it up<IMG src="smileys/smiley20.gif" border="0"><IMG src="smileys/smiley32.gif" border="0"></P>

[m0ksha]

gr8 modelling! though the texturing and lightin lacks sumthing i cant put my finger on

[Stephen]

<P>great modelling and nice placements of texures</P>
<P>all the paint works are similarly glossy, give some variations in the reflections(try making the text more reflective than the body works).</P>

[3d_devil]

hey nice model man !! can u share the image plane u used for modellin ?<br>

[Vishwaman Rai]

hi everyone thanks for the feedback. yeah i have to do something about the tires and the helmet texturing.if u notice guys, the mirrors are missing. will have to model them too. and 3d devil, here are the pics i used as reference. hope it helps. ive inverted the side pic by the way.<IMG src="http://img468.imageshack.us/img468/7417/f1top0ur.jpg" border="0"><IMG src="http://img468.imageshack.us/img468/2391/f1side18si.jpg" border="0">

[bishtmahesh]

<P>Kool Dude ......!!&nbsp; </P>
<P>Keep it <IMG src="smileys/smiley32.gif" border="0">&nbsp;<IMG src="smileys/smiley32.gif" border="0"></P>

[faiman]

Hi Vishwaman..
<br />
<br /> Good to see some F1 here :).... just few things i like to mention
<br />here... small details u need to fix
<br />the cockepit area the edges area so hard.
<br />Exhaust Area is missing.... One bit important thing is the
<br />aerodynamics of the F1 is not that matching up :).
<br />These few small things which shows the details.... take ur model in to
<br />reality :) here'z the link which might help u a bit to imporve.
<br />
<br />http://cifesystem.com/yaf4.html

[Vishwaman Rai]

thanks everyone. yeah i definately have to do the mirrors and the exsausts. Been really busy lately but nevertheless.. it'll be here. Take care

[ajaytantra]

<P><strong>MIND BLOWING MODEL</strong> ..... <strong>N TEXTURES</strong></P>
<P>&nbsp;&nbsp; wow man...u did it.... !!! textures are so damn realistic...how on earth did u manage that... I need your help badly...would u mind sharing some tips...</P>
<P>&nbsp;&nbsp; I need to texture my Ferrari too <IMG src="smileys/smiley4.gif" border="0"></P>

[Vishwaman Rai]

hi ajay. thanks for the kind words. well if u need any help feel free to ask. i used used a simple uvw unwrap on the car body and created the textures and car colour in photoshop. i used an hrdi image for the reflection. i just kept it very simple. feel free to ask! well. see u later!!

[lostworldenator]

<P>Simply awesome buddy.......... u really havin a good job here.....</P>
<P>***** stars frm me...................<IMG src="smileys/smiley32.gif" border="0"></P>

[pokeye]

<P>gr8 modelling buddy</P>
<P>but i too feel&nbsp;the edges are a little hard there.</P>

[VishyP]

<P>hi vish, good work man keep it up, but dude tyers need some work.</P>
<P>Cheers</P>
<P>vishal</P>

[gearz]

hey good modelling u hav done a grt job keep it up<IMG src="smileys/smiley32.gif" border="0">

[Vishwaman Rai]

alright guys. thanks again yea i'll definately work on&nbsp;the other stuff&nbsp;and update these pages as soon as possible! catch you all later! in the meantime heres the wire of the car. <IMG src="http://img301.imageshack.us/img301/7949/f1wire8lk.jpg" border="0">

[3d_devil]

hey man !! sorry for the late reply... busy busy busy&nbsp;<img src="smileys/smiley9.gif" border="0"><br>
<br>
thankz for sharin the ref img...<br>
<br>
did u re-draw the company names n logos on the texture ?<br>
<br>
i was thinkin why spent $65 on <a href="http://www.alias.com/glb/eng/products-services/learning_tool_details.jsp?itemId=3300006" target="_blank">Maya Techniques? | Non-Organic Surface<br>
Modeling</a> if v can have the techniques n knowledge from a member of cgtantra ....<br>
<br>
it would b gr88 to have step by step WIP tut of this model.... would b gr888ful if u can fine the time for it ....<img src="smileys/smiley4.gif" border="0"> <br>
<br>
keep up the good work....<br>




<edited><editID>3d_devil</editID><editDate>38711.0255555556</editDate></edited>

[mudit2903]

hi,<br>
<br>
great modeling dude.<img src="smileys/smiley1.gif" border="0"><br>
<br>
sum critics though:-<br>
<br>
reflections are too much, they should be less.<br>
helmet placed to give driver's feel doesnt luk good<br>
edges of back portion(above engine hollow) should be smooth n not hard edged<br>
n the grey peice at the top gives a feel like u forgot to texture it<br>
chrome material is not good.<br>
<br>

[warriorash]

Awesome Work Man!..... i am quite new to 3d world... so i cant comment much on it.... but i can see the time and commitment u have put on this Model...<br>anyway thanks for the wireframe and the Image planes..... hope to se more of ur works!... <img src="smileys/smiley1.gif" border="0"><br><br>chao ... bye <br>

[CURSED STROKES]

cooooooooooooollll i love it <img border="0" src="smileys/smiley4.gif" border="0">